SNGU Handmade Multimedia Full Bamboo Keyboard & Mouse Cmobo
Buy on Amazon
When use the keyboard, the indicator is not bright, only just when the installation of the battery will flashing red lights, one second later, the indicator will not bright
receiver matching steps:
1.the receiver do not insert the computer USB interface, put next to spare;
2, the keyboard after equipped with batteries, press the ESC key and "=" key at the same time, all loose after five seconds, then indicator, on the red light.It receiver within ten seconds after the red light is inserted into the USB interface, keyboard code successfully.
3,.if not the code successfully, repeat the above operation.
Special note the mouse for code:
equipped with batteries, at the same time hold down the left, middle and right three buttons, all loose after 5 seconds, then on the back of the mouse will change from light to dark, long light indicator, insert the receiver into the USB interface in ten seconds, the mouse to code.
As the keyboard is only one key area, so the part above the word key with number keys function, such as "U" key at the same time have a number "4" above the key. You only need to click on the "Num Lock" key, so can separate the words and number keys, which is in the input words won't appear when a digital appeared at the same time.
Common problems in the keyboard/mouse to code:
1.the battery power is not enough, the code requires higher power, or new batteries;
2.the indicator light display is not correct, need to confirm back buttons, indicator light shows normal to the code;
3.USB driver is installed, in USB port, or restart the computer operation to the code again;
4.the mouse and receiver pairs, the distance is too far away, please as far as possible with the receiver close to 10 cm distance.
|Main Category||Office Product|